When it comes to change bike bearings, it is believed that prevention is much better than cure. Here, in this blog, you will get to know some important facts how often you need to change your bike bearings. So, without wasting much time, let’s check out the details below-
Checking bearings from time to time
Bearing is a very important part of your bike, especially wheels, bottom bracket and headset. To keep all these parts always in top condition and to prevent them from becoming corroded and worn, changing bearings from time to time is mandatory. If you don’t take proper care of your bike, you may have to face these problem often occurring at worst times.
However, when to change your bike bearings is a difficult task and to make this task a bit easier for you, you, here in this blog, will come to know about some simple tricks that can help you accessing the conditions of your bike and you will come to know about the conditions of changing your bike bearings.
You need to assess the condition of the bottom bracket bearing by spinning the crack and unshipping the chain, you will be able to hear it. You must hold the seal stay while spinning the crack, if you can hear the sound of worn bearings, assume it’s time to change the bearings.
There is another way through which you can assess the condition of the wheel bearings and you can do it easily by suspending the bike, how quick the spin-up speed is, lifting the cam lever. If your wheels use cartridge bearings, then you have to move the wheel a little bit and look for the quick release skewer.
Next, if your wheels use a cone and cup system, then you need to unscrew the cone. Next comes, checking the headset bearings and you can do it easily through check out its play and roughness. You will get to see a brown fluid is running from the lower bearing down the back side of the fork. If you would like to delve deeper search then remove the front wheel and front brake as well. Unscrew the clamp bolts and stem the top cap, you will get to know the condition of your wheel bearings more accurately.
Once you access to headset bearings, you can easily decide how to carry out a bike bearing repair or replacement. Those which are plain steel bearings are likely to rust quickly and therefore, they should be replaced from time to time. Using stainless bearings is a great option and you don’t need to worry if you install expensive headset bearings. Moreover, if you would like to do an efficient bike bearing replacement then you should remove the seals and degrease the bearings. Along with this, you should remove the debris with an airline. It is truly a great idea. Once the cleaning is done, disgrace the bearings, replace the parts and place the stem handlebar unit on its position.
