Wood Staining Tips

Staining wood can add a lot of feeling to a home. It makes it warm, inviting, and gives it that interesting historic look. Some homeowners may want this to be done professionally and that’s a fine option. Hiring professional contractors that use popular wood stain brands is a fine idea. Other homeowners will want to turn a wood staining job into a little project. This is a great way to learn more about home improvement and might even save a little money in the end. Let’s look at some common tips when staining wood.

  1. Use the right wood stain

This is very important and mistakes here can really ruin the final look. The most popular wood stain brands offer a wide variety of looks to go for. It is best to consult with a hardware professional in this step because of how important it is.

When something like a sealant and finisher gets applied the overall look may be a bit darker. If a really dark look is desired then go for something like a dark walnut or espresso. After a good sealer is applied a dark walnut would be a bit darker and look richer.

The amount of stains varies a bit and lighter color shades are available. It’s also best to apply the stain on some practice wood and see how it turns out. A bit of preparation can prevent a lot of regrets.

  1. Use the right tools

Using the right tools is common sense for any job. For wood staining, it is best to use a good pair of rubber gloves, some sponge brushes, and stuff for sanding and cleaning the wood. The wood that’s going to be stained does have to be prepared a bit.

  1. Prepare the wood for staining

This is a straight forward part. The wood that’s going to be stained has to be sanded and cleaned. This is to take off any imperfections and let the stain really take to the wood. Light sandpaper should be used. One that’s not too abrasive like a fine grit paper should work. Now if there are some rougher things that have to be removed like an old finish then go with a medium grit first, clean it up, then a once over with a fine grain.

  1. Go with the grain and use multiple coats

Dip the foam or sponge brush in some of the stain and brush it with the grain first. Then just pull it back against the grain. This makes the finish look good on the wood and not messy. This also lets the stain soak in real good with the wood.

Doing multiple coats is always a good idea. Multiple coats allow the homeowner to control how rich the stain should be. This is an important part because the sealant can affect the final look. This is why it is best to work with a piece of practice wood first then apply it to the rest of the area that’s being stained.

The last thing that should be done is to use a sealant. A sealant can affect how dark the stain looks but it also protects it.

  1. Conclusion

Staining wood can be a great side project for a homeowner. Using the right tools and the right stain are very important steps, don’t ignore them. Using a piece of practice wood is a good way of seeing how the final product will look. Home owners following these tips can make their homes look good with a great stain.

 

Leave a Reply

Your email address will not be published. Required fields are marked *